Feed aggregator

Olimex Showcases Develoment Board Design Based on ESP32-P4 RISC-V SoC

The Raspberry Pi community has launched two new accessories to enhance their single-board computers: the $12 USB 3 Hub, providing four-way USB 3.0 connectivity, and the $60 Touch Display 2, offering a higher-resolution, slimmer touch interface for interactive use. The USB 3 Hub provides high-speed data transfer up to 5 Gbps across four downstream USB […]

(Updated) Banana Pi Showcases BPI-CanMV-K230D Zero with Canaan K230D Chip Design

SolidRun HummingBoard i.MX8M IIOT SBC with NVMe, RS232, RS485, and LTE Support

Forlinx Embedded has introduced the FET-MX95xx-C System on Module, built around the high-performance NXP i.MX95xx processor for industrial, automotive, and IoT applications. Key features include a 10GbE port, dual GbE ports, CAN interfaces, camera support, and multiple wireless protocols. Unlike the FET3562J-C SoM, this new Forlinx device is powered by the NXP i.MX95xx processor. It […]

The T-Display S3 AMOLED Plus is an upgraded development board based on the ESP32-S3 microcontroller with a dual-core LX7 processor. It features a 1.91″ AMOLED display with a 240×536 resolution, using RM67162 IPS AMOLED technology for sharp colors and full viewing angles with QSPI interface support. Similar to the LILYGO T4 S3 launched last year, […]

MYC LR3576 SoM with Octa-Core RK3576 for Embedded Applications

WIZnet has revealed two new microcontroller evaluation boards, the W5500-EVB-Pico2 and W5100S-EVB-Pico2. These boards are based on the Raspberry Pi RP2350 microcontroller and are equipped with fully hardwired TCP/IP controllers, enhancing their networking capabilities. The W5500-EVB-Pico2 features the W5500 Ethernet Controller, which supports eight independent hardware sockets. This allows for handling multiple network connections simultaneously. […]

Engicam has showcased a single-board computer based on the RockChip RK3568 series, targeting a range of embedded and industrial applications. This high-performance board offers dual Gigabit Ethernet ports, including one with PoE+ support, as well as an HDMI port capable of up to 4K resolution at 60Hz. Powered by the RockChip RK3568 or RK3568J CPU, […]

Luckfox Omni3576 Board with Rockchip RK3576 Running Debian 12

M5Stack has launched the M5Stack LLM Module, an advanced offline large language model inference module designed for terminal devices requiring efficient, cloud-independent AI processing. This product is described as targeting offline applications such as smart homes, voice assistants, and industrial control. The AX630C SoC appears to include dual-core Arm A53 processors clocked at 1.2GHz, along […]

CrowdSupply recently launched the USB Insight Hub, a tool designed to provide detailed monitoring and control over multiple USB devices. Built for developers and tech enthusiasts, this hub offers a range of monitoring features, allowing users to view power and data usage in depth. The hub features a Renesas uPD720210 USB 3.0 controller, supporting both […]

The Tinker Board 3 is a compact, fanless single-board computer powered by the Rockchip RK3566 SoC, designed for embedded and IoT applications that require multi-display capabilities, wireless connectivity, or Gigabit Ethernet support. This board integrates a quad-core Arm Cortex-A55 processor with a 64-bit Arm v8 architecture. It comes with either 2GB or 4GB LPDDR4X memory […]

Waveshare has launched the ESP32-P4-NANO board, powered by the ESP32-P4 SoC featuring RISC-V dual-core and single-core processors. This board is tailored for advanced HMI and edge computing applications. Equipped with Wi-Fi 6 and Bluetooth 5/BLE via the onboard ESP32-C6-MINI module, it ensures efficient wireless connectivity through the SDIO interface. The ESP32-P4 chipset includes a dual-core […]

Pineboards launched the HatDrive! POE+, designed to simplify power and connectivity for the Raspberry Pi 5 through Power-over-Ethernet. This PoE+ HAT integrates both network connectivity and power delivery over a single RJ45 cable, providing a streamlined setup where multiple smaller devices can operate without the need for additional power cables. The HatDrive! POE+ enables both […]

The ARK FPV NDAA-compliant flight controller is compact and designed around the ARKV6X model, following a standard 30.5mm mounting pattern. It supports 3-12s battery input, providing a regulated 12V 2A output for video transmitters and payloads. The controller is compatible with PX4 Autopilot firmware (version 1.15+), pre-installed, and also supports Ardupilot version 4.5+. This controller […]

The Protectli VP3200 Series introduces modular 2-port Vault devices: the VP3210 with an Intel N100 processor and the VP3230 with an Intel i3-N305. Both models support up to 16GB DDR5 RAM, include 32GB eMMC storage, and feature two 2.5GbE Ethernet ports for high-speed applications. Dual M.2 NVMe SSD slots offer up to 2TB of additional […]

WIZnet recently introduced two new microcontroller boards with built-in Ethernet controllers, flash memory, and compatibility with the Raspberry Pi Pico. The W6100-EVB-Pico2 is powered by the advanced RP2350 microcontroller, while the W55RP20-EVB-Pico utilizes the RP2040 microcontroller, each offering unique features suited for diverse networking applications. The W6100-EVB-Pico2 is a versatile evaluation board designed for applications […]

Orbbec unveiled the Orbbec Perceptor Developer Kit at ROSCon 2024 in Odense, Denmark, offering a comprehensive, out-of-the-box solution for autonomous mobile robot development. Developed in collaboration with NVIDIA, the OPDK is designed to streamline application development for dynamic environments, such as warehouses and factories. The OPDK integrates four Gemini 335L Depth+RGB cameras with the NVIDIA […]

PineNote Community Edition Is an Upcoming E-Ink Tablet with Community-Built OS